Honeywell/Safran Joint Venture Tests Electric Taxiing

By Guy Norris, Graham Warwick
Source: Aviation Week & Space Technology
June 24, 2013
Credit: Eric Drouin/Safran

An Airbus A320 accelerating, reversing and pirouetting, its engines silent, may be an unusual sight, but the public demonstration of electric taxiing at Le Bourget may persuade aircraft manufacturers to acquiesce to airline demands and install the fuel-saving technology.

The concept involves fitting electrically driven motors to the aircraft's wheels, which will be used in place of the main engines to taxi. The systems, which will take power from the aircraft's auxiliary power unit (APU), are designed to reduce fuel-burn and emissions, lower direct operating costs, reduce maintenance time, extend engine life and provide environmental benefits.

Unlike the taxiing system in development by WheelTug, which uses electric motors in the nosewheels, the Honeywell-Safran system demonstrated on an A320 at last week's Paris air show has motors in the wheels of the main landing gear. In development by EGTS (Electric Green Taxiing System), a 50:50 joint venture formed by the two companies in 2012, the system could save up to $200,000 per aircraft per year in fuel costs, says Jim Fusaro, Honeywell product marketing vice president and EGTS business manager.

“We've looked at the mid- to short-haul market, and we think that is where there is the greatest value,” he says. Based on the standard taxiing procedures of a typical A320 making a 500-nm flight, the company predicts the system will save up to 4% in block fuel costs. Assumptions include an average taxi time of 20 min. with a single engine operating. “We are looking at total system savings, fuel consumption of the APU versus the main engine, the weight of the system and any ancillary benefits such as savings associated with tug operations, a 2-min. shave off the push-back time, reduced brake wear and less foreign object damage to the engine,” he adds. The system will also reduce carbon emissions by 75% and nitrogen-oxide emissions by up to 50%, reducing carbon taxes at various European airports.

The decision to power the main rather than nosewheels was “predicated on the majority of the aircraft's weight being transmitted through the main gear,” says Fusaro. Less than 10% of an aircraft's weight is on the nose gear, so EGTS believes its system is therefore better equipped to handle adverse surface conditions on the ground, slopes, snow, ice and breakaway torque considerations when aircraft “sink” into soft tarmac on hot days.

Honeywell and Safran, which first announced their intent to explore an electric taxi system in 2011, have combined their expertise in avionics, power and landing-gear equipment into an integrated system designed to accelerate an aircraft to around 20 kt. in 90 sec., or 18 kt. at maximum takeoff weight (MTOW). The system will also be capable of accelerating to 10 kt. in 20 sec. to cross active runways. It will also have the power to achieve breakaway torque on a 1.5% slope at MTOW.

A 50-kw electric motor will be built into the outer wheel on each main landing-gear unit, says Olivier Savin, Safran vice president for EGTS. The installation includes power converters to drive the motors from the APU, which will need a larger generator to power the wheels, and a reduction gearbox to drive the wheel through a clutch/reaction torque mechanism which is integrated with the brake control. The installed unit is now expected to weigh around 150 kg (330 lb.) per wheel, though “there will always be further optimization,” says Fusaro.


Comments On Articles